Script started on 2026-03-20 10:28:46+01:00 [COMMAND="/usr/bin/sshpass -P assword -f /home/admin/pass ssh root@10.224.1.141 -o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null -o KexAlgorithms=+diffie-hellman-group1-sha1 -o Ciphers=+aes128-cbc -o HostKeyAlgorithms=+ssh-rsa" ] Warning: Permanently added '10.224.1.141' (ED25519) to the list of known hosts. ^@^@^@^E^A^@^@^@^FUser AutheUser AuthentReceived disconnect from 10.224.1.141 port 22:2: Reenter times have reached the upper limit. Disconnected from 10.224.1.141 port 22 Script done on 2026-03-20 10:28:46+01:00 [COMMAND_EXIT_CODE="255"] ---------------- User last login information: ----------------------------------------------------------------------------- Access Type : SSH IP-Address : 10.224.1.209 Login Time : 2026-03-20 02:32:35+08:00 Logout Time : 2026-03-20 02:37:40+08:00 ----------------------------------------------------------------------------- MA5800-X7>undo smart Interactive function is disabled MA5800-X7>idle-timeout 255 MA5800-X7>enable MA5800-X7#config MA5800-X7(config)#diagnose MA5800-X7(diagnose)%%su Warning: Commands in SU mode are used only by experts for maintenance purpose. Do not use them in common serving providing and problem locating. Incorrect using of these commands may lead to device failures or service interruption. Exercise caution when running these commands. MA5800-X7(su)%%dbwin enable MA5800-X7(su)%%dbwin print 0x19e 1 MA5800-X7(su)%%dbwin send 0x19e 2 0xff 2 MA5800-X7(su)%%dbwin [04:11:59.121][C:0xe00bc2f0][P:0x19e] 3OntDbg switch: 0 MA5800-X7(su)%%dbwin [04:11:59.121][C:0xe00bc2f0][P:0x19e] 3OntDbg paramenters: 1_1_1440_1_0_0_1 MA5800-X7(su)%%dbwin [04:11:59.121][C:0xe00bc2f0][P:0x19e]adjust VENDORID0: ffffffff MA5800-X7(su)%%dbwin [04:11:59.121][C:0xe00bc2f0][P:0x19e]adjust VENDORID1: ffffffff MA5800-X7(su)%%dbwin [04:11:59.121][C:0xe00bc2f0][P:0x19e]adjust VENDORID2: ffffffff MA5800-X7(su)%%dbwin [04:11:59.121][C:0xe00bc2f0][P:0x19e]adjust VENDORID3: ffffffff MA5800-X7(su)%%dbwin [04:11:59.121][C:0xe00bc2f0][P:0x19e]adjust VENDORID4: ffffffff MA5800-X7(su)%%dbwin [04:11:59.121][C:0xe00bc2f0][P:0x19e]adjust VENDORID5: ffffffff MA5800-X7(su)%%dbwin [04:11:59.121][C:0xe00bc2f0][P:0x19e]adjust VENDORID6: ffffffff MA5800-X7(su)%%dbwin [04:11:59.121][C:0xe00bc2f0][P:0x19e]adjust VENDORID7: ffffffff MA5800-X7(su)%%dbwin [04:11:59.121][C:0xe00bc2f0][P:0x19e]adjust VENDORID8: ffffffff MA5800-X7(su)%%dbwin [04:11:59.121][C:0xe00bc2f0][P:0x19e]adjust VENDORID9: ffffffff MA5800-X7(su)%%dbwin [04:11:59.121][C:0xe00bc2f0][P:0x19e]adjust VENDORID10: ffffffff MA5800-X7(su)%%dbwin [04:11:59.121][C:0xe00bc2f0][P:0x19e]adjust VENDORID11: ffffffff MA5800-X7(su)%%dbwin [04:11:59.121][C:0xe00bc2f0][P:0x19e]adjust VENDORID12: ffffffff MA5800-X7(su)%%dbwin [04:11:59.121][C:0xe00bc2f0][P:0x19e]adjust VENDORID13: ffffffff MA5800-X7(su)%%dbwin [04:11:59.121][C:0xe00bc2f0][P:0x19e]adjust VENDORID14: ffffffff MA5800-X7(su)%%dbwin [04:11:59.121][C:0xe00bc2f0][P:0x19e]adjust VENDORID15: ffffffff MA5800-X7(su)%%dbwin [04:11:59.121][C:0xe00bc2f0][P:0x19e]adjust VENDORID16: ffffffff MA5800-X7(su)%%dbwin [04:11:59.121][C:0xe00bc2f0][P:0x19e]adjust VENDORID17: ffffffff MA5800-X7(su)%%dbwin [04:11:59.121][C:0xe00bc2f0][P:0x19e]adjust VENDORID18: ffffffff MA5800-X7(su)%%dbwin [04:11:59.121][C:0xe00bc2f0][P:0x19e]adjust VENDORID19: ffffffff MA5800-X7(su)%%dbwin [04:11:59.121][C:0xe00bc2f0][P:0x19e]adjust VENDORID20: ffffffff MA5800-X7(su)%%dbwin [04:11:59.121][C:0xe00bc2f0][P:0x19e]adjust VENDORID21: ffffffff MA5800-X7(su)%%dbwin [04:11:59.121][C:0xe00bc2f0][P:0x19e]adjust VENDORID22: ffffffff MA5800-X7(su)%%dbwin [04:11:59.121][C:0xe00bc2f0][P:0x19e]adjust VENDORID23: ffffffff MA5800-X7(su)%%dbwin [04:11:59.121][C:0xe00bc2f0][P:0x19e]adjust VENDORID24: ffffffff MA5800-X7(su)%%dbwin [04:11:59.121][C:0xe00bc2f0][P:0x19e]adjust VENDORID25: ffffffff MA5800-X7(su)%%dbwin [04:11:59.121][C:0xe00bc2f0][P:0x19e] 10G MngtLevel: 1 MA5800-X7(su)%%dbwin [04:11:59.121][C:0xe00bc2f0][P:0x19e] adjust 10G VENDORID0: ffffffff MA5800-X7(su)%%dbwin [04:11:59.121][C:0xe00bc2f0][P:0x19e] adjust 10G VENDORID1: ffffffff MA5800-X7(su)%%dbwin [04:11:59.121][C:0xe00bc2f0][P:0x19e] adjust 10G VENDORID2: ffffffff MA5800-X7(su)%%dbwin [04:11:59.121][C:0xe00bc2f0][P:0x19e] adjust 10G VENDORID3: ffffffff MA5800-X7(su)%%dbwin [04:11:59.121][C:0xe00bc2f0][P:0x19e] adjust 10G VENDORID4: ffffffff MA5800-X7(su)%%dbwin [04:11:59.121][C:0xe00bc2f0][P:0x19e] adjust 10G VENDORID5: ffffffff MA5800-X7(su)%%dbwin [04:11:59.121][C:0xe00bc2f0][P:0x19e] adjust 10G VENDORID6: ffffffff MA5800-X7(su)%%dbwin [04:11:59.121][C:0xe00bc2f0][P:0x19e] adjust 10G VENDORID7: ffffffff MA5800-X7(su)%%dbwin [04:11:59.121][C:0xe00bc2f0][P:0x19e] adjust 10G VENDORID8: ffffffff MA5800-X7(su)%%dbwin [04:11:59.121][C:0xe00bc2f0][P:0x19e] adjust 10G VENDORID9: ffffffff MA5800-X7(su)%%dbwin [04:11:59.121][C:0xe00bc2f0][P:0x19e] adjust 10G VENDORID10: ffffffff MA5800-X7(su)%%dbwin [04:11:59.121][C:0xe00bc2f0][P:0x19e] adjust 10G VENDORID11: ffffffff MA5800-X7(su)%%dbwin [04:11:59.121][C:0xe00bc2f0][P:0x19e] adjust 10G VENDORID12: ffffffff MA5800-X7(su)%%dbwin [04:11:59.121][C:0xe00bc2f0][P:0x19e] adjust 10G VENDORID13: ffffffff MA5800-X7(su)%%dbwin [04:11:59.121][C:0xe00bc2f0][P:0x19e] adjust 10G VENDORID14: ffffffff MA5800-X7(su)%%dbwin [04:11:59.121][C:0xe00bc2f0][P:0x19e] adjust 10G VENDORID15: ffffffff MA5800-X7(su)%%dbwin [04:11:59.121][C:0xe00bc2f0][P:0x19e] adjust 10G VENDORID16: ffffffff MA5800-X7(su)%%dbwin [04:11:59.121][C:0xe00bc2f0][P:0x19e] adjust 10G VENDORID17: ffffffff MA5800-X7(su)%%dbwin [04:11:59.121][C:0xe00bc2f0][P:0x19e] adjust 10G VENDORID18: ffffffff MA5800-X7(su)%%dbwin [04:11:59.121][C:0xe00bc2f0][P:0x19e] adjust 10G VENDORID19: ffffffff MA5800-X7(su)%%dbwin [04:11:59.121][C:0xe00bc2f0][P:0x19e] adjust 10G VENDORID20: ffffffff MA5800-X7(su)%%dbwin [04:11:59.121][C:0xe00bc2f0][P:0x19e] adjust 10G VENDORID21: ffffffff MA5800-X7(su)%%dbwin [04:11:59.121][C:0xe00bc2f0][P:0x19e] adjust 10G VENDORID22: ffffffff MA5800-X7(su)%%dbwin [04:11:59.121][C:0xe00bc2f0][P:0x19e] adjust 10G VENDORID23: ffffffff MA5800-X7(su)%%dbwin [04:11:59.121][C:0xe00bc2f0][P:0x19e] adjust 10G VENDORID24: ffffffff MA5800-X7(su)%%dbwin [04:11:59.121][C:0xe00bc2f0][P:0x19e] adjust 10G VENDORID25: ffffffff MA5800-X7(su)%%dbwin [04:11:59.131][C:0xe00bc2f0][P:0x19e] 3OntDbg Info set success: 0x0 MA5800-X7(su)%%dbwin send 0x19e 2 0xff 0x2c 171 MA5800-X7(su)%%dbwin [04:11:59.301][C:0xe00bc2f0][P:0x19e] idle-timeout minutes 171 MA5800-X7(su)%%dbwin [04:11:59.301][C:0xe00bc2f0][P:0x19e] 3OntDbg Info set success: 0x0 MA5800-X7(su)%%dbwin print 0x19e 0 MA5800-X7(su)%%dbwin disable MA5800-X7(su)%%save It will take several minutes to save configuration file, please wait... MA5800-X7(su)%% Configuration file had been saved successfully MA5800-X7(su)%% MA5800-X7(su)%% MA5800-X7(su)%% The data is being saved, please wait a moment... MA5800-X7(su)%% 1 [2026-03-20 04:12:36+08:00]:The percentage of saved data on 8 slot's control board is: 50% MA5800-X7(su)%% 1 [2026-03-20 04:12:38+08:00]:The percentage of saved data on 8 slot's control board is: 89% MA5800-X7(su)%% 1 [2026-03-20 04:12:39+08:00]:The data of 8 slot's control board is saved completely MA5800-X7(su)%%reset ? --------------------------------------------- Command of su Mode: --------------------------------------------- cfm Continuity Fault Management cpu The cpu information --------------------------------------------- Command of privilege Mode: --------------------------------------------- aaa AAA(Authentication,Authorization,Accounting) acl Clear ACL information arp Reset ARP entry dhcp DHCP dhcp-server Clear counters of DHCP server group dhcpv6 DHCPv6 command group dns DNS status and configuration information efm Ethernet fault management firewall Specify firewall configuration ip IP information ipv6 ipv6 command group mac-address MAC address table ntp-service NTP(Network Time Protocol) service pppoe PPPoE pw Specify PW configuration information ---- More ( Press 'Q' to break ) ---- rip RIP (Routing information protocol) ripng RIPng status and configuration information vpls Virtual private LAN service --------------------------------------------- Command of user Mode: --------------------------------------------- arp Reset ARP entry bfd Specify Bidirectional Forwarding Detection (BFD) bgp Border Gateway Protocol(BGP) counters Statistics information about the interface hwtacacs-server HWTACACS server information ip IP information ipv6 IPv6 status and configuration information isis Clear ISIS lspv Lsp verification master-mpu Reset master mpu mpls Multiprotocol Label Switching(MPLS) ospf Open Shortest Path First (OSPF) ospfv3 OSPF version 3 for IPv6 pim Protocol Independent Multicast rawip RAWIP module rawlink RAWLINK module route-policy Route policy information tcp TCP module ---- More ( Press 'Q' to break ) ---- traffic-statistics Traffic-statistics udp UDP module MA5800-X7(su)%%reset       undo hi? ^ % Unknown command, the error locates at '^' MA5800-X7(su)%%undo hi ? ^ % Unknown command, the error locates at '^' MA5800-X7(su)%%undo h      history-command ? --------------------------------------------- Command of user Mode: --------------------------------------------- max-size Set the size of history commands in buffer MA5800-X7(su)%%history-command                 display ? --------------------------------------------- Command of su Mode: --------------------------------------------- affinity-mapping Affinity mapping areashift The area shift of the program ,database and extended bios arp Display ARP entries bfd Specify Bidirectional Forwarding Detection (BFD) bgp Border Gateway Protocol(BGP) blackbox Query Utas log board Display information of board bulk-statistic Display the information of the module and the file capability Capability cfm Continuity Fault Management compiling Display the compiled time and version current-configuration Current configuration data Display data synchronization status dcn Data Communication Network debug Query dotting buffer debugging Debugging information default-parameter Display default configuration parameter value dfs Distributed file storage diagnostic-information System information for diagnosis ---- More ( Press 'Q' to break ) ---- dns DNS status and configuration information dopra Display the basic information of dopra dopra-log ed25519 Display ED25519 module status and configuration information efs Display program efs information epon evpn Ethernet Virtual Private Network explicit-path Specify explicit path fan Fan Command Group feature Display feature state info fidinfo Display the FID information flash Display state of files in flash igmp IGMP keyword interface Show information of interfaces io-packetfile IO packet file in flash ip IP information ipfpm Display IPFPM(IP Flow Performance Measurement) information ipv6 IPv6 status and configuration information isis ISIS status and configuration information keychain Keychain configuration l2vpn Operate on MPLS L2VPN lastwords Lastwords commands ---- More ( Press 'Q' to break ) ---- link Display link index log log command group logbuffer Log buffer status and configuration information logfile Display log file information master-key Master key mpls Multiprotocol Label Switching (MPLS) status and configuration information msg Display msg information neid Net-Element ID ntp-service NTP(Network Time Protocol) service otnpro Liquid otn debug packet-filter Display the configuration information of packet filter paf PAF(Product Adaptive File) pidinfo Display the PID information pim PIM status and configuration information progress Display progress qos-acl The Qos based on ACL qos-info QoS interface configuration information queue Queue-related commands reboot-record Display system reset record reset-record Display board reset record router Configure router information sapi Service API saved-configuration The saved configuration information ---- More ( Press 'Q' to break ) ----  MA5800-X7(su)%%display h? --------------------------------------------- Command of privilege Mode: --------------------------------------------- host Host hqos Hierarchical QoS hwtacacs-server HWTACACS template and server configuration information --------------------------------------------- Command of user Mode: --------------------------------------------- history-command Display the session history command MA5800-X7(su)%%display history-command -------------------------------------------------- No. Command -------------------------------------------------- 10 display h? 9 display ? 8 history-command ? 7 undo h? 6 undo hi? 5 reset ? 4 save 3 dbwin disable 2 dbwin print 0x19e 0 1 dbwin send 0x19e 2 0xff 0x2c 171 -------------------------------------------------- MA5800-X7(su)%%test ^ % Unknown command, the error locates at '^' MA5800-X7(su)%%test1 ^ % Unknown command, the error locates at '^' MA5800-X7(su)%%test2 ^ % Unknown command, the error locates at '^' MA5800-X7(su)%%test3 ^ % Unknown command, the error locates at '^' MA5800-X7(su)%%test4 ^ % Unknown command, the error locates at '^' MA5800-X7(su)%%test5 ^ % Unknown command, the error locates at '^' MA5800-X7(su)%%test6 ^ % Unknown command, the error locates at '^' MA5800-X7(su)%%test7 ^ % Unknown command, the error locates at '^' MA5800-X7(su)%%test8 ^ % Unknown command, the error locates at '^' MA5800-X7(su)%%test9 ^ % Unknown command, the error locates at '^' MA5800-X7(su)%%test10 ^ % Unknown command, the error locates at '^' MA5800-X7(su)%%display history-command  ? --------------------------------------------- Command of user Mode: --------------------------------------------- Please press ENTER to execute command | Matching output > Redirection output MA5800-X7(su)%%display history-command -------------------------------------------------- No. Command -------------------------------------------------- 10 display history-command ? 9 test10 8 test9 7 test8 6 test7 5 test6 4 test5 3 test4 2 test3 1 test2 -------------------------------------------------- MA5800-X7(su)%%quit MA5800-X7#quit Check whether system data has been changed. Please save data before logout. Are you sure to log out? (y/n)[n]:y Configuration console exit, please retry to log on Connection to 10.224.1.141 closed. Script done on 2026-03-20 10:33:27+01:00 [COMMAND_EXIT_CODE="255"]